S&W M&P 9 Shield M2.0 w/ Crimson Trace Red Laser with EDC Kit
We are offering a special version of the Shield as it is packaged with a pouch, knife, and light called an EDC Kit. With the $50 rebate, it is like getting the Crimson Trace laser, pouch, knife, and light for free!
We are offering a special version of the Shield as it is packaged with a pouch, knife, and light called an EDC Kit. With the $50 rebate, it is like getting the Crimson Trace laser, pouch, knife, and light for free!
The Smith & Wesson M&P 9 Shield EDC M2.0™ Thumb Safety, W/ Crimson Trace Laser, 9MM offers an 18 degree grip angle for natural point of aim, incorporates the design features of the M&P line of firearms, a striker-fire for short consistent trigger pull every time, and 2 magazines: one with extended capacity for full grip.
Smith & Wesson shield pistols are thin and lightweight, making it a perfect option for concealed carry. The M&P 9 Shield EDC M2.0™ features an all new Aggressive grip texture for enhanced control and the new M&P M2.0 crisp trigger with lighter trigger pull. The Smith & Wesson M&P Shield 9 M2.0™ has a polymer frame with matte black finish. This model of the Shield 9 has a manual thumb safety.
The “Every Day Carry” Pack comes with a soft notebook case, 2 magazines, and Black M&P knife and flashlight. The Crimson Trace Laserguard features ambidextrous controls, and is integrated directly into the frame of the pistol.
The Smith & Wesson shield has been the go-to concealed carry gun for over a million people. They took feedback from the original model and came out with M2.0. A great gun made even better.
We are selling this model with the built-in Crimson Trace Red Laser for less than some places are selling the pistol without the laser!
The reality of protection is that you never know when you’ll need it. We took the power and features of our full sized M&P pistols and put them into a slim, lightweight pistol the size of your hand. The M&P Shield is an easy to conceal pistol that offers professional grade features with simple operation and reliable performance day or night. One million Shield owners can’t be wrong.
Specifications:
Integrated Crimson Trace® Red Laser
Incorporates the design features of the M&P M2.0 line of firearms.
Aggressive grip texture for enhanced control.
New M&P M2.0 crisp trigger with lighter trigger pull.
Tactile and audible trigger reset.
Extremely thin and lightweight – can be comfortably carried all day.
M&P’s patented take-down lever and sear deactivation systems allow for disassembly without pulling the trigger.
Includes 2 magazines: One 7-round magazine. One 8-round extended grip magazine.
Optimal 18-degree grip angle for natural point of aim.
Armornite® durable corrosion resistant finish.
Backed by Smith & Wesson’s Lifetime Service Policy.
S&W MSRP $499.99
Cabelas $499,99
Bud’s $455.26
Sportsman’s Warehouse $449.99
REBATE: There is currently a $50 rebate directly from S&W. Click here for rebate details.
Get this really sweet 16″ AR-15 with a mid-length gas system. MOE furniture, EPT (Enhanced Polished Trigger) and that great free-floating rail gives you everything you could want in an AR at a sale price point!
Are you putting together an AR or would like an M-LOK rail, or your old AR needs an upgrade. Either way, grab this upper and start shooting!
Barrel: 16″ 416R Stainless steel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a mid-length gas system. Pencil profile barrel is finished off with PSA 13.5″ Precision M-Lok rail, .625″ diameter low-profile gas block, and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized.
This is a really sweet 8.5″ upper with a 7″ rail paired with the popular SBA3 pistol brace and your choice of lower.
Barrel: 8.5″ Chambered in 5.56 NATO, with a 1:7 twist rate, M4 barrel extension, and a pistol length gas system. This barrel is nitride treated for accuracy and durability. It is finished off with a PSA 7″ Lightweight M-Lok free-float rail, .750″ diameter low profile gas block, and an A2 flash hider.
Upper: Forged 7075-T6 A3 AR 7″ upper is made to MIL-SPECS and hard coat anodized black for durability.
A high quality lower build kit with everything you need to assemble your AR-15 lower into a pistol. Features Enhanced Polished Trigger (EPT), Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.
Each kit includes a Magpul 30rd PMAG
What makes this custom, is you get to choose your lower, and we have several cool limited edition options!
Pick an Eagle, Minutemen, M4A1, or even a baby poop flinging gremlin!
If you want a plain lower, take $10 off. This sale is for a kit. The upper is assembled, and only needs to be pinned to the lower kit which includes your choice of lower. After the sale, you can assemble the lower kit yourself or arrange to get it done.
Barrel: 10.5″ chrome moly steel barrel. Chambered in 9mm, (9×19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 9″ Lightweight M-lok free-float rail and a 9mm birdcage flash hider. Muzzle Thread: 1/2-36
Upper: Billet 7075-T6 A3 AR upper is hard coat anodized black for durability. These slick side upper receivers are made for us right here in the USA.
Bolt Carrier Group: Gen 4 Hybrid 9mm BCG. Nitride treated 8620 steel, with enhanced firing pin and external 5.56 style extractor. The bolt carrier group is compatible with most aftermarket fire control groups.
Us this upper for your AR-9 build. Works with PSA and other lowers.
NOTE: We also offer the 9mm upper in both 4 and 8″ versions!
As an alternative to the birdcage flash hider, you can get a PSA fluted flash can which we also sell. They help propel the force, fireball, and blast forward as opposed to around the barrel end.
The GSG FireFly features a wear-resistant alloy frame outfitted with an integrated accessory rail. The slide features adjustable sights, and along with the rugged blowback system, fixed barrel and superior ergonomic grip, the GSG FireFly delivers exceptional accuracy. Additional safeties include an internal locking device and slide mounted ambidextrous safety.
Some of you know this pistol by it’s other name, the Sig Mosquito, yes, the same gun.
We offer adapters so you can use the pistol with standard 1/2″ thread devices such as the faux suppressors we sell which you can see here on green version of the pistol
GSG Firefly shown with optional thread adapter and faux suppressor
The thread adapter and faux suppressor combo sell for $55, both parts can be purchased separately.
When selling pistols, carbines, and rifles using the AR DI gas system, I always stress getting the longest gas system you can for the barrel you are using. This is why I primarily sell 16″ carbine systems with a mid-length gas system, and I suggest pistol buyers stick with the 10.5″ versions as they can use a carbine-length gas system. The article below gives you the facts behind the suggestion.
The gas port and tube that causes the bolt to cycle. These parts, from the gas port drilled in the barrel, through the gas block, tube, and the gas key in the bolt carrier, collectively make up the gas system. With a few (piston-driven or single-shot) exceptions that we won’t discuss here, pretty much all ARs cycle this way.
What changes, though, is the location of the gas port along the barrel. The gas port MUST be located far enough from the muzzle that the pressure has time to kick the bolt carrier back before the bullet exits about 1/4000th of a second later. That demands that the gas port be a certain size, and a certain distance from the muzzle — which actually varies, because pressures change as you go further from the chamber.
So shorter barrels need a shorter gas tube, and with the gas port closer to the chamber, the pressures are higher.
Not just a little higher, either. Dramatically higher.
Look at the chart below:
Gas System
Gas Port Location
Pressure (PSI)
Pistol
4.7″
48,300
Carbine
7.8″
33,000
Mid-Length
9.8″
26,500
Rifle
13.2″
19,600
This means the shorter your gas system is, the higher the pressures it’s subjected to. The bolt and carrier are slammed harder; they work harder, and the whole system becomes far more sensitive to anything that’s not perfect.
In addition, a shorter gas system is inevitably harsher in operation, because it has to cycle in a shorter time.
The original design was the rifle length system, and that’s what the gas system is designed around. At rifle length, an aluminum gas block is fine, which keeps weight down. But with the carbine length, the pressures are almost twice as high, and an aluminum gas block will eventually be eroded by the hot gas charges.
If you’re using a carbine length gas system, or even a mid-length, a steel gas block is recommended.
Also, as the gas systems get shorter, the size of the gas port increases, because they need to bleed off a lot of pressure in a shorter time. If the gas port is too small, the rifle will short-stroke, probably resulting in failures to feed. The port can be drilled larger, but this should be done by a qualified gunsmith, or you risk ruining the barrel.
On the other hand, if the port is too big, the rifle will be “overgassed.” That can send the gas impulse to the bolt too early, while the shell is still locked into the chamber by pressure, and cause it to fail to eject. At the very least, an overgassed rifle will be harsh to shoot. This can be addressed with an adjustable gas block, which lets you control how much gas bleeds through, allowing you to find the point where it cycles reliably.
For what it’s worth, most 14.5″ and 16″ barrels are set up for carbine gas systems, though you can find 16″ barrels with mid-length systems. The mid-length system (not an official standard, by the way, but an industry standard nonetheless) is commonly found on 18″ barrels, but they can be had with rifle length systems. And rifle length gas systems are standard on 20″ and longer barrels, and there’s NO reason to ever want to go shorter. In general, the longer your gas system is, the smoother and more reliably it’ll operate – though you do need a certain minimum dwell time after the bullet passes the gas port.
Check out this premium AR-15 with a custom lower. Pick a lower and put it with this kit.
Gas System: Mid-Length
Enhanced Polished Trigger Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1 in 7″
Barrel Extension: M4
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Hand guard Type: Magpul MOEM-LOK Black Handguards
Bolt Carrier Profile: Full Auto
Rear Sight: Magpul MBUS Rear Flip-Up Sight
Magpul 30rd P-MAG Magazine included (not one pictured)
Please note this is an upper end carbine with a mid-length gas system which means less felt recoil, less damage to bolt and receiver equals longer life.
What makes this custom, is you get to choose your lower, and we have several cool limited edition options!
Pick a Grim Reaper, or an Eagle.
If you want a plain lower, take $10 off. This sale is for a kit. The upper is assembled, and only needs to be pinned to the lower kit which includes your choice of lower. After the sale, you can assemble the lower kit yourself or arrange to get it done.
Are you putting together an AR or would like an M-LOK rail, or your old AR needs an upgrade. Either way, grab this upper and start shooting!
Barrel: 16″ 416R Stainless steel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a mid-length gas system. Pencil profile barrel is finished off with PSA 13.5″ Precision M-lok rail, .625″ diameter low-profile gas block, and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized.
We have paired up a great 7.5″ AR-15 Pistol upper with a top end MOE+ EPT SBA3 kit to which you add a custom lower receiver.
Barrel: 7.5″ 4150V Chrome Moly vanadium steel, phosphate coated and chambered in 5.56 NATO with a 1 in 7″ twist. Pistol-length gas barrel is finished off with an anodized PSA 6″ Lightweight M-Lok Rail, a low profile gas block and an A2 Flash hider.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected, Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated.
A high quality lower build kit with everything you need to assemble your AR-15 lower into a pistol. Features Enhanced Polished Trigger (EPT), Magpul MOE+ Overmolded Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.
The kit includes a 30rd Magpul P-MAG
What makes this custom, is you get to choose your lower, and we have several cool limited edition options!
Pick a Grim Reaper, or an Eagle. Neither of these designs are made any longer, instant collector’s item!
Recent Comments