|
|
We are offering the Anderson Manufacturing AM-15 lower. These are intended for sale in the ABQ area avoiding FFL fees and shipping vs adding those fees to one purchased on the internet.
 Anderson Manufacturing AM-15 Stripped Lower Receiver The AM-15 Stripped Lower Receiver is American made with superior quality for less! Our lower Receivers are CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked “Multi-Cal” to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, with an Open Trigger.
Don’t over pay for the same lower receiver with a different logo and use your money saved elsewhere on your build! Pair this with one of our Upper Receivers for a solid fit for your AM-15 build!
We have all of the other components to turn this receiver into a pistol or carbine.
 Smith & Wession M&P 9 Shield, right side A slim, concealable and lightweight design combined with the proven and trusted features found in the M&P Pistol Series. From the easily concealed one-inch profile to its optimized 18-degree grip angle, the M&P Shield offers professional-grade features that will provide you with simple operation and reliable performance.
The M&P Shield also features a quick and audible reset made possible by the striker-fired action, allowing multiple rounds to be placed on target both consistently and accurately. And it’s all backed by Smith & Wesson’s Lifetime Service Policy.
S&W durability. From the optimized 18-degree grip angle providing a natural point of aim, to the best-in-class M&P durability – the M&P Shield is a professional-grade, conceal carry pistol designed to shoot as well as it conceals.
Shield advantages. The M&P Shield combines all of the fine-tuned advantages that make M&P pistols comfortable to shoot with a slim, one-inch profile for comfortable carry.
 Smith & Wesson M&P9 Shield 9mm 7/8 Round NEW We have this pistol in stock to buy and pickup today!
Buy local and avoid delays, shipping fees and FFL costs.
We also have the very hard to find 9mm ammo to go with it!
 SAR9, 9mm Pistol, 4.4″ Barrel, 17+1 Rounds NEW $419 Possibly the most rigorously tested pistol ever developed, the new SAR9 endured 130°F baking to simulate desert conditions, -50°F for the arctic, salt fog, high altitude, 24 hours of rain, solar radiation, fouling, drop tests and 150,000 rounds of live fire in the factory. Police later ran their own test that included 50,000 rounds. Finally, a NATO test against major manufacturers from Austria, Germany and the U.S. ran 90,000 rounds—with the SAR9 the clear winner.
All that said, the SAR9 has more to offer than just toughness and reliability. The lightweight, polymer-framed, striker-fired SAR9 points naturally and is a joy to shoot. With a choice of 3 backstraps to customize fit, a low bore axis that reduces muzzle climb, and 20° grip angle that provides superior control and second-shot recovery…accuracy is a sure thing. Couple these features with a safety trigger that’s smoother than a double-action revolver, and the SAR9 becomes the perfect carry pistol when you want a round in the chamber.
PLEASE NOTE: This Pistol now features a manual thumb safety.
- Torture-tested in some of the most extreme conditions imaginable
- Low bore axis directs recoil backward—not upwards—to help reduce muzzle climb
- 20° grip angle provides superior control
- Large front and rear slide serrations
- Low-profile combat sights, the rear is adjustable
- Manual thumb safety
- Trigger safety
- Includes (2) 17-rd. magazines and (3) interchangeable backstraps
Locally available in the Albuquerque area without any shipping or FFL fees. Why wait and pay more?
We have 9mm ammo in stock for our gun purchasers!
 FMP 10.5″ AR9 Pistol Glock Style The Foxtrot Mike Products 9mm AR Pistol blowback pistol chambered in 9mm. It features a smooth pistol length buffer tube and buffer/recoil spring combination tuned to reliably cycle a wide variety of ammunition. The Foxtrot Mike (FM) heavy 9mm bolt reduces bolt bounce ensuring safe and smooth feeling action. The FM Products blast diffuser extends past the M-LOK handguard and directs all the excess gas and concussion of your shots forward instead of the sides offering a more enjoyable shooting experience. The upper and lower receivers are machined from billet aluminum allowing for a greater degree of customizability and long service life.
The FM 9mm AR pistol magazine well and upper receiver feed ramps are machined for use with Glock magazines. It is easily customizable due to its compatibility with standard AR-15 parts like a trigger, pistol grip, and safety selector. The integrated magazine release is much larger and easier to reach than the Mil-Spec alternative allowing for quicker magazine changes. This FM-9 features the popular forward-mounted side charging handle that can be swapped to either side.
SPECIFICATIONS
Barrel Coating: Salt Bath Nitride
Barrel Length: 10.5″
Caliber: 9mm Luger
8.75 in M-LOK Rail
Thread Pattern 1/2 X 36
Twist Rate1:10
- Patented Proprietary Last Round Bolt Hold Open, best on the market.
The pistol comes with a M4 6-position buffer tube for a brace if so desired.
We also have ammo available to go with it 🙂
 You never know when you might want a suppressor, so why not get a faux one for now to be prepared! We have a variety of options to give your firearm the suppressor look by using a faux version. Maybe you just like the look, or maybe you want to try the faux version to test it on your gun before buying a NFA one. We also offer some other unique products.
 Display/Faux suppressor mounted on a threaded
barrel pistol using a M8X1/2″28tpi adapter COLT, GSG, UZI and WALTHER THREAD ADAPTER AND DISPLAY SUPPRESSOR COMBO – COMBO SAVINGS $55 each, saving you the shipping cost!
Do you have a Walther P22, a Colt Gold Cup Trophy, UZI Pistol, or similar pistol with either the 3.4″ or the 5″ barrel and want the suppressor look and feel without all the paperwork hassle and transfer tax expenses? Now with our THREAD ADAPTER WITH THREAD PROTECTOR AND FAKE SUPPRESSOR COMBO, you get ALL THREE PIECES FOR ONE LOW PRICE!
Our .22 LR FAKE SUPPRESSOR is as close to a real suppressor as you can get without paying the tax stamp and it will work on any .22LR firearm that has the barrel threaded 1/2×28 TPI. Its CNC precision machined from solid aircraft grade aluminum with a durable hard black anodized finish and its professionally laser engraved identically to our real NFA registered suppressors. Since its a fake suppressor, the sound is not reduced and bullet impact is not changed. Although, many customers do prefer the weight and balance improvement that the suppressor provides.
The FAKE SUPPRESSOR easily screws on to your THREAD ADAPTER ASSEMBLY (thread adapter and thread protector) which is included in this money saving combo.
Don’t let the low price fool you… We are the source and manufacture 1000’s of fake suppressors and thread adapters to supply other major manufacturers, distributors and resellers. You won’t find a better fake suppressor and adapter combo at ANY price.
ONE LOW PRICE! ALL THREE PARTS! Order today and get your gun lookin’ right!
DISPLAY SUPPRESSORS $29-44 each
.22LR Display/Faux suppressor, 1/2″-28 thread $29
.223/5.56 Display/Faux suppressor, 1/2″-28 thread $29
Follow this link for a list of common barrel muzzle threads for various calibers and guns
THREAD ADAPTERS M8X75 to 1/2″X28 $25 EACH
Models are made to work with specific guns but will also work on similar guns with a M8 thread.
Walther P22
Smith&Wesson MP22 (made by Walther)
Uzi .22LR Pistol
Colt Gold Cup Trophy 1922 .22LR
GSG
and other compatible models
THREAD ADAPTERS For SR-22
11/32″-24 UNS-2A
 THREAD ADAPTER For M11/9 Suppressors 1/2″x28 ID to 3/4″x10 OD THREAD ADAPTERS For MAC M10/9 and M11/9 Suppressors $35
1/2″x28 ID to 3/4″x10 OD
 oil filter adapter to attached a oil filter or other threaded item to a 1/2″ or 5/8″ muzzle thread THREAD ADAPTERS 1/2″ x 28 tpi TO VARIOUS – Common on .17/.22 and 9mm pistols and rifles (Oil Filter Adapters) $19-31
| $28 |
1/2″-28 to 5/8″-24 thread adapter black |
| $19 |
1/2″-28 to 3/4″-16 thread adapter black |
| $24 |
1/2″-28 to 3/4″-16 thread adapter SS |
| $21 |
1/2″-28 to 13/16″-16 thread adapter Black |
| $25 |
1/2″-28 to 13/16″-16 thread adapter SS |
| $22 |
1/2″-28 to 3/4″ NPT thread adapter black |
|
|
| $35 |
1/2″-28 to 3-way black (3/4, 13/16, 3/4 NPT) |
14x1mm LH to 3/4″-16 RH thread adapter (AK-47/AKM) $33
THREAD ADAPTERS 5/8″X24TPI TO VARIOUS – Common to .308/7.62 and .338LM (Oil Filter Adapters)
| $25 |
5/8″-24 to 13/16″-16 thread adapter black |
| $27 |
5/8″-24 to 13/16″-16 thread adapter SS |
| $27 |
5/8″-24 to 3/4″ NPT thread adapter black |
| $35 |
5/8″-24 to 3/4″-16, 13/16″-16, 3/4″ NPT triple thread adapter black |
FLASH HIDERS $10-15 EACH
.22LR pistol (with 1/2-28″ thread) $15
AR15 A2 “Partial Cage” Flash Hider $12
….and a 10/22 specific version on our 10/22 page
PLUG CAP ENDS FOR FUEL FILTERS $6
3/4″NPT for use with Lee/NAPA 4003 style fuel filters
MAGLIGHT adapters $29 (Retail $49.99)
Use this pair of adapters to convert the ends of your Maglight to a solvent trap.
 End caps for a D cell Maglite Registration with the ATF or other agencies is NOT a requirement for any adapters, provided that they are used for their intended purposes. The ATF does not regulate muzzle adapter devices provided there is no reduction in db’s to the report of the firearm.
It is a violation of Federal law to muffle the report of a firearm with any non ATF/NFA registered device. However, it is Federally lawful for an individual to, for individual use, make such a device, provided that they first apply for a permit and register the device with the ATF (Form 1) before making such a device. If it is your intent to create such an item, it is your responsibility to review ATF regulations and seek their guidance, along with that of your State and Local Authorities, so as to remain lawful in your endeavor.
We are not responsible for any unlawful or unintended use of our products. Thank you!
 Dickinson Marine Tactical, Pump Action Shotgun, 12 Gauge, 20″ Barrel, Ghost Ring Sight, 5+1 Rounds Dickinson® XX3D-M-2 Marine Tactical 12-gauge Pump Shotgun
Dickinson® Shotguns are made with as few mechanical parts as possible, delivering reliable operation when you need it most. The Dickinson® Commando XX3D-M-2 Tactical Shotgun features a 20″ barrel for maneuverability in hallways and other interior spaces, and instead of a choke, it’s outfitted with a muzzle brake to help minimize recoil.
The Shotgun comes equipped with a tactical synthetic stock that features spots to carry 5 extra shells. A ghost ring rear sight delivers lightning-fast targeting that won’t obscure your target, plus a Picatinny rail atop the receiver and on the forend for mounting accessories. Finished off with a highly resilient marine finish, it’s a no-nonsense Tactical Shotgun at an uncommonly low price, so don’t wait—these are sure to disappear fast.
- 20″ barrel with a removable muzzle brake to help keep you on-target
- Highly resilient marine finish provides added durability
- Synthetic stock with onboard storage for 5 extra shells
- Thick recoil pad for comfortable shooting
- Finger groove pistol grip for sure hold
- Ghost ring rear sight delivers lightning-fast targeting
- Picatinny rails on top of receiver and on the forend
- Heat shield included
- Includes a hard case for storage and transportation
- Fixed cylinder bore
Buy locally in the ABQ area and avoid FFL and shipping fees!
Many of you know about my small set of PSA lower receivers that quickly gained collector status. The first one we are offering for sale is the Baby Poop Flinging Gremlin. Another Gremlin went for something like $500-700 or some equally absurd amount.
 Baby Poop Flinging Gremlin Stripped AR-15 Lower
Below is the information straight from PSA.
This is one of several PSA lowers I will have for sale. See note at bottom of listing.
Palmetto State Armory’s limited-edition “BABYPFG-15” AR-15 lower will only be available once and is a limited edition offering. The “BABYPFG-15” AR-15 lower comes from the most advanced aerospace manufacturing technology and is one of the industry’s finest forged, MIL-SPEC lowers. This PSA lower is made using our automated manufacturing process. Our multi-million dollar engineering and manufacturing facilities allow us to produce a product of unequaled quality and value.
These forged lowers are quality made, MIL-SPEC designed and use 7075-T6 Aluminum. The Palmetto State Armory “BABYPFG-15” AR-15 Lower will accommodate all AR-15 platform builds and is marked “BABYPFG-15 MULTI”. The finish is MIL-A-8625, Type III, Class 2 black.
DETAILS
Finish: Black, Hardcoat Anodized
Caliber: Multi
Fire Selector: “Make Poop” (Safe), “Toss Poop” (Fire), “Spray Poop” (Full-Auto)
The pictures are from PSA and better than I can do. The lower is new and is serial POOPY00432.
We don’t sell to California or other places we have to jump through hoops.
About once a week we will be making other collectible PSA lowers for sale:
Two very special Minutemen, successive and special serials
Alien-51…have been asked a lot for this one.
Frankengun, a crowd favorite, maybe up next.
Then a couple of Rosies….not just the women want this one!
Last but not least, MAGA…yes, have one left…
Buyer chooses between UPS and USPS and if they want to pay for insurance.
Bid is set at what currently available lowers are selling for and this isn’t a current model, this is collectible.
The Gunbroker listing is here: https://www.gunbroker.com/item/892691485
 Anderson Manufacturing AR-15 with Fixed Front Sight The Anderson Manufacturing AM15 comes with everything you need in an AR. The barrel is 4150 chromemoly steel in a 1:8 twist to stabilize a wide array of ammo. The Bolt is 9310 steel and MPI tested. The chrome lined carrier is 8620 streel. This rifle comes with Anderson’s proprietary 174 stainless steel match grade trigger and hammer. The 6 position stock features a QD sling swivel mount built in. The AM15 ships with a 30 round magazine. A quality gun at a great price!
For some reason, when I bought this carbine, it was cheaper than the OCR model??? Normally the front sight post adds some additional cost and price to the M4. In this case, you save enough money to buy a compatible rear sight which we have in stock.
Barrel Length: 16.5
Barrel Material: 4150 Chrome Moly Steel
Brand: Anderson Manufacturing
Caliber Gauge: 5.56 NATO
Gas System Length: Carbine
Gas System Type: Direct Impingement
Handguard
Muzzle Device: A2 Flash Hider
Receiver Material: 7075-T6 Aluminum
Safety: Standard
Stock: M4 Carbine Stock
Twist Rate: 1:8
Weight: 6.2 Lbs.
 S&W M&P9 SHIELD 9MM BUG OUT BUNDLE
SMITH & WESSON
S&W M&P9 SHIELD 9MM BUG OUT BUNDLE ***LIMIT ONE***
The standard Shield comes with one 7 round and one 8 round. The 8 rd magazines sell for $35 so you are getting over $100 in the value of the magazines. Similar Bug Our Bags go for $40-100. On top of that you get a S&W mask and a compact First Aid Kit. A tremendous value bundle.
The Shield was top-selling pistol two years in a row and is still a top seller!
Sale not allowed in California; Massachusetts
Purchase locally in the ABQ area and avoid shipping costs and FFL fees!
Make an appointment and pick it up today!
 Radical Firearms 16″ Socom 5.56mm AR-15 The Radical Firearms 16″ SOCOMM 5.56mm AR rifle uses MIL-STD Upper and lower receivers along with our 15″ RPR free float rail system for increased accuracy, keeping your hands cool, and giving you plenty of room for accessories. The MFT Grip and MFT Stock provide a comfortable hold on the rifle whether prone or upright. Regardless if it’s your first or fiftieth, a Radical Firearms AR rifle will not disappoint!
- Barrel Length: 16″
- Barrel Material: 4140 Chrome Moly Vanadium
- Barrel Finish: Melonite
- Barrel Profile: Socom
- Barrel Thread Pitch: 1/2×28
- Chamber: 5.56mm
- Twist Rate: 1:7 (can handle the heavy bullets)
- Barrel Extension: M4 Feed Ramps
- Gas System: Mid Length (preferred for lower recoil)
- Gas Block Type: .750 Low Profile Gas Block
- Muzzle Device: A2 Flash Hider
- Upper Receiver Material: Forged 7075 T6
- Upper Receiver Style: M4 MIL-STD
- Upper Receiver Finish: Type III Anodizing
- Forward Assist: Yes
- Dust Cover: Yes
- Handguard Type: Free Float
- Handguard Style: M-Lok Thin Rail
- Handguard Length: 15″
- Charging Handle: MIL-STD
- Lower Receiver: Forged 7075 T6
- Lower Receiver Finish: Type III Anodizing
- Fire Control Group: Semi-Automatic MIL-STD Style Ambi
- Grip: MFT EPG16V2 Grip
- Buffer Tube: Carbine MIL-STD
- Stock Adjustment: 6 Postion
- Stock: MFT Minimalist
- Magazine: 5.56mm 30 Round
We also have a variety of .223 and 5.56mm ammo for this carbine together with optics, slings, etc.
Buy local in the Albuquerque area to avoid shipping and FFL fees and without the online order delays!
|
|
Recent Comments